Load data for .30-30 Ackley Improved + .308 | 130gr | Ferrobull Tripple Expand Jagd

Recommended Powder(s): Accurate 2015, Alliant AR-Comp, Alliant Reloder-10x, IMR 4198, Norma 200

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 130gr \| Ferrobull Tripple Expand Jagd
Manufacturer SKU:	J-30-130
Bullet Weight:	130gr \| 8.4g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	<<locked>>
Caliber:	.30-30 Ackley Improved load data
Case Length (l3):	2.030" \| 51.6mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	48.6 Grains of Water \| 3.16 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	46412 psi \| 3200 bar
LID:	LID_B9066_C326
Last updated:	2026-02-11

Load data for 76 loads in caliber .30-30 Ackley Improved with .308 | 130gr | Ferrobull Tripple Expand Jagd bullet and 38 powders such as Accurate 2015, Alliant AR-Comp, Alliant Reloder-10x, IMR 4198, Norma 200. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	87%	40524	87%	**87	100%
ADI AR 2219	<<locked>>	90%	41031	88%	**23	96%
Accurate 2015 👍	<<locked>>	96%	41582	90%	**10	99%
[Accurate 2460]*	<<locked>>	95%	41626	90%	**07	94%
Accurate 2495	<<locked>>	96%	31995	69%	**25	96%
[Accurate 2520]*	<<locked>>	97%	35940	77%	**54	93%
Alliant AR-Comp 👍	<<locked>>	96%	36695	79%	**90	99%
Alliant Reloder-10x 👍	<<locked>>	93%	41437	89%	**26	99%
Alliant Reloder-7	<<locked>>	85%	41060	88%	**54	99%
Baschieri & Pellagri 106	<<locked>>	89%	40567	87%	**11	97%
[Hodgdon Benchmark]*	<<locked>>	95%	41307	89%	**51	93%
[Hodgdon CFE BLK]*	<<locked>>	86%	41481	89%	**08	92%
Hodgdon H322	<<locked>>	96%	41713	90%	**36	97%
Hodgdon H335	<<locked>>	91%	40814	88%	**13	95%
Hodgdon H4198	<<locked>>	87%	41031	88%	**15	96%
[IMR 3031]*	<<locked>>	97%	31908	69%	**85	94%
IMR 4198 👍	<<locked>>	91%	40901	88%	**67	99%
[IMR 8208 XBR]*	<<locked>>	97%	40089	86%	**64	91%
[Lovex D073.4]*	<<locked>>	93%	41640	90%	**90	93%
[Lovex D073.5]*	<<locked>>	95%	41626	90%	**07	94%
Norma 200 👍	<<locked>>	89%	41292	89%	**07	99%
[Norma 202]*	<<locked>>	97%	35882	77%	**25	94%
[ReloadSwiss RS 40]*	<<locked>>	94%	41698	90%	**10	94%
Rottweil R 901	<<locked>>	97%	39755	86%	**70	95%
SNPE Vectan BA6 1/2	<<locked>>	84%	41611	90%	**77	100%
SNPE Vectan SP 10	<<locked>>	90%	41075	88%	**20	95%
SNPE Vectan Tubal 3000	<<locked>>	97%	39494	85%	**05	95%
[SNPE Vectan Tubal 5000]*	<<locked>>	97%	31705	68%	**57	93%
[Somchem S321]*	<<locked>>	96%	41104	89%	**16	92%
Somchem S335	<<locked>>	96%	37260	80%	**92	95%
Vihtavuori N120	<<locked>>	89%	40567	87%	**41	100%
Vihtavuori N130	<<locked>>	95%	41553	90%	**64	99%
Vihtavuori N133	<<locked>>	96%	34983	75%	**49	96%
[Vihtavuori N135]*	<<locked>>	97%	26353	57%	**01	92%
[Vihtavuori N140]*	<<locked>>	96%	33344	72%	**43	93%
[Vihtavuori N530]*	<<locked>>	96%	40857	88%	**93	92%
[Vihtavuori N540]*	<<locked>>	96%	33301	72%	**65	92%
[Winchester 748]*	<<locked>>	96%	41684	90%	**39	93%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	34040	73%	**62	100%
[ADI AR 2219]*	<<locked>>	81%	30240	65%	**87	92%
[Accurate 2015]*	<<locked>>	81%	25295	55%	**62	93%
[Accurate 2460]*	<<locked>>	88%	33011	71%	**39	90%
[Accurate 2495]*	<<locked>>	85%	21350	46%	**39	90%
[Accurate 2520]*	<<locked>>	93%	31183	67%	**49	90%
[Alliant AR-Comp]*	<<locked>>	81%	22698	49%	**16	93%
Alliant Reloder-10x	<<locked>>	81%	28311	61%	**54	96%
Alliant Reloder-7	<<locked>>	81%	35607	77%	**59	98%
[Baschieri & Pellagri 106]*	<<locked>>	81%	31227	67%	**31	94%
[Hodgdon Benchmark]*	<<locked>>	90%	35085	76%	**26	90%
[Hodgdon CFE BLK]*	<<locked>>	82%	37478	81%	**33	90%
[Hodgdon H322]*	<<locked>>	83%	27441	59%	**15	90%
[Hodgdon H335]*	<<locked>>	81%	29588	64%	**67	90%
[Hodgdon H4198]*	<<locked>>	81%	34577	74%	**90	94%
[IMR 3031]*	<<locked>>	89%	25730	55%	**08	90%
IMR 4198	<<locked>>	81%	30835	66%	**60	97%
[IMR 8208 XBR]*	<<locked>>	94%	36956	80%	**05	90%
[Lovex D073.4]*	<<locked>>	87%	33968	73%	**46	90%
[Lovex D073.5]*	<<locked>>	88%	33011	71%	**39	90%
Norma 200	<<locked>>	81%	31937	69%	**29	98%
[Norma 202]*	<<locked>>	90%	28906	62%	**64	90%
[ReloadSwiss RS 40]*	<<locked>>	86%	32430	70%	**23	90%
[Rottweil R 901]*	<<locked>>	87%	29124	63%	**44	90%
SNPE Vectan BA6 1/2	<<locked>>	81%	38130	82%	**24	100%
[SNPE Vectan SP 10]*	<<locked>>	81%	30342	65%	**93	91%
[SNPE Vectan Tubal 3000]*	<<locked>>	87%	29530	64%	**98	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	91%	26934	58%	**36	90%
[Somchem S321]*	<<locked>>	91%	35882	77%	**11	90%
[Somchem S335]*	<<locked>>	85%	26716	58%	**56	90%
Vihtavuori N120	<<locked>>	81%	31894	69%	**87	100%
[Vihtavuori N130]*	<<locked>>	81%	26992	58%	**62	94%
[Vihtavuori N133]*	<<locked>>	82%	23119	50%	**47	90%
[Vihtavuori N135]*	<<locked>>	94%	24192	52%	**39	90%
[Vihtavuori N140]*	<<locked>>	91%	28369	61%	**21	90%
[Vihtavuori N530]*	<<locked>>	92%	36347	78%	**11	90%
[Vihtavuori N540]*	<<locked>>	93%	29805	64%	**83	90%
[Winchester 748]*	<<locked>>	91%	35505	77%	**11	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data